Scuba Diving O-Rings -111 Small DIN Regulator Valve
For Apeks DIN (G5/8) first stages: this is the correct 111 o-ring for the slightly smaller Apeks groove — standard DIN valves use the larger 112.
AS568-111 NBR 70~90
Pack of 10 pcs.
Used for Small DIN Regulator Valve and Old Yoke Valves. Australian Nemrod valves.
Apeks and Scubapro first stage regulators that screw into and seals to the
female DIN fitting on the cylinder valve.
Size: ID X CS : 10,77 X 2,62 mm
1/2 ID x 3/32 OD x 11/16 CS
APEKS: AP1166
Scubapro: 01.050.193
Sherwood: 6400-138
Aqualung: 124709
MARES: 46110247k
Buna Nitrile rubber is considered the standard for most general applications.
Excellent resistance to petroleum-based lubricants, hydraulic oils, gasoline, fuels, and L.P. gases.
Temperature range -58 F to 248 F with intermittent service to 600 F.
